Growing demand for electricity infrastructure and semiconductor manufacturing is increasing the need to control emissions of sulfur hexafluoride (SF6), an extremely potent greenhouse gas.
Researchers from Jeonbuk National University in South Korea have developed a process that could make treating SF6 more economically attractive by turning waste brine from seawater desalination into a source of useful chemicals and valuable products.
The proposed approach combines greenhouse gas treatment with resource recovery, potentially transforming two environmental challenges into an economic opportunity.
Through process simulations, the researchers found that producing treatment chemicals from desalination brine, recovering valuable by-products and reusing heat could generate enough revenue to exceed the estimated costs of treating SF6.
SF6 is widely used in high-voltage electrical equipment because of its excellent insulating properties. It is also used in semiconductor manufacturing as an etching gas.
However, its environmental impact is considerable. Over a 100-year period, SF6 can trap approximately 24,300 times more heat than an equivalent amount of carbon dioxide (CO2).
Its exceptional atmospheric stability also means it can persist for nearly 3,000 years, making the prevention of emissions particularly important.
As electricity grids expand to support artificial intelligence infrastructure and transport electrification, managing SF6 emissions is becoming increasingly important.
Conventional treatment involves high-temperature incineration, followed by chemical scrubbing to neutralise the resulting gases.
However, the process can be costly, creating a need for more economically sustainable treatment methods.
To address this challenge, a research team led by Assistant Professor Sunghyun Cho at the School of Chemical Engineering, Jeonbuk National University, designed and evaluated four process configurations for treating 250 kg of SF6 per hour. The study examined their economic performance and environmental impacts.
The first configuration represented conventional incineration followed by a single chemical scrubbing stage. The second introduced multiple scrubbing stages to improve treatment and recover useful salts, including calcium fluoride, gypsum and sodium carbonate.
The third configuration integrated processed seawater desalination brine into the treatment system. Rather than disposing of the saline waste, the researchers used it as a feedstock for producing chemicals required for SF6 treatment.
This approach also enabled the recovery of additional valuable products, including magnesium hydroxide, hydrogen and chlorine.
The fourth configuration further improved the integrated process by introducing a heat-exchange network. This allowed heat generated within the system to be recovered and reused, reducing energy requirements.
The economic findings highlighted the potential benefits of this approach. Conventional treatment had a levelized cost of US$13.95 per kilogram of SF6 destroyed.
Introducing multiple scrubbing stages reduced this figure to US$3.25 per kilogram. However, integrating desalination brine processing brought the cost down further to −US$2.32 per kilogram.
The negative cost indicates that revenue generated from recovered products could exceed the estimated annualised costs of SF6 treatment. Incorporating heat recovery improved the economics further, reducing the figure to −US$4.01 per kilogram.
The heat-integrated configuration also reduced heating and cooling demands by 56.15% and 63.74%, respectively.
Environmental assessments were similarly encouraging. All four configurations reduced the global warming impact by more than 99.8% compared with directly releasing SF6 into the atmosphere.
The heat-integrated system also achieved net-negative emissions when powered by an electricity mix containing 35% renewable energy.
The findings, published in the Journal of Cleaner Production (Volume 573) on August 2, 2026, demonstrate how waste brine from seawater desalination could support more affordable and sustainable greenhouse gas treatment.
According to Dr. Cho, integrating these processes offers a way to address SF6 emissions and saline wastewater simultaneously through waste treatment, resource recovery and chemical production within a circular industrial system.







